Component to Composite w/Down Scaling

Component to Composite w/Down Scaling



Component to Composite w/Down Scaling Feature :

Input: 1 Component Video (YPbPr), Audio R/L

Output: 1 Composite Video (RCA), 1 S-video

Simultaneously output composite video and s-video

Output video supports both NTSC and PAL. Switch by button on the box

With Audio L and Audio R inputs supports earphone

If you have a component (YPbPr or Red, Green, Blue RCA interfaces) source that you need to display on a TV with a composite input (typically yellow RCA) or S-Video, this converter is perfect for you. This converter also handles audio pass-through with dual RCA input on the component side and 3.5mm stereo output on the composite side.

Why The Conversion Box?

Component and composite/s-video signals are two very different signals. With component, the video signal is divided into three different signals in order to theoretically transmit up to 3 times as much video information, making component capable of handling HD resolutions up to 1080p. Composite and S-Video (both the same signal) don't have high definition capabilities and handle all video over a single conductor.

This conversion box not only integrates the RGB component signal into the composite signal (something a simple cable can't do), and also downscales the signal to fit the resolution of your standard definition composite TV.

This converter also includes a PAL/NTSC switch (PAL for European/Asian (except Japan) users, NTSC for North American/Japanese users)